The DIY Roof Inspection
The National Association of the Remodeling Industry has compiled a few useful roof maintenance tips to ensure you get the most out of your roof. With warm weather on its way this weekend, it’s the perfect time to get the job done!
“Your roof is exposed to the scorching sun, high winds, driving rains, and heavy snowfalls, which makes it one of the home’s toughest-working systems. All that contact with Mother Nature can wreak havoc on the surface and interior structures, so a regular inspection is essential to its longevity. Read on for a three-part plan that will help you identify problems and potential solutions.
1. Inspect the exterior. On a warm, dry day, inspect your entire roof for loose tiles, warped shingles, and detached flashing. On some roofs, you can see a lot by using a pair of binoculars. Experienced roof workers can also climb on the roof to inspect the surface. Be sure to recruit a family member or neighbor to be your spotter and ensure that you get up and down safely.
Solution: If you do find damage, make plans to replace the shingles and reattach the flashing. You should also call in a roofing professional to do a more thorough roof inspection. Some roofing companies will perform the inspection for free, while others may charge around $200.
2. Inspect the interior attic space. Look for damaged wood and any indications of water penetration. The presence of mold can indicate poor ventilation; wet building materials; or an improperly vented bathroom, kitchen, and dryer exhaust. Mold growth in attics causes potentially hazardous living conditions, not to mention property depreciation and or structural damage.
Solution: If you find moisture issues in your attic, it’s best to call in the professionals. A roofing contractor can repair leaks or make recommendations for a roof replaceme
nt, if necessary. You can sometimes reverse mold issues by clearing out the affected insulation that is blocking soffit vents. Other times, an electric attic fan and humidistat are necessary. A pro can also seal wire holes, light, or pipe penetrations, or redirect exhaust vents.
3. Look for moss: Moss thrives on roofs that face north and areas that see the little sun. The presence of moss will dramatically reduce the lifespan of your roof because it traps moisture and holds it in place. Wet shingles are prone to rot, and the excess moisture will promote more damage in freeze-thaw conditions.
Solution: Using a pressure washer to clean off moss is not recommended because the high-powered stream will force water beneath your shingles, potentially causing more long-term water damage. Instead, start by brushing off the majority of the moss with a large broom. Then apply a moss remover specifically formulated for roofs. Call in a moss removal specialist for the safest and quickest removal. If you decide to do it yourself, call in a friend to be your safety spotter.
4. Check and clean your gutters. On a warm day, inspect your gutters for blockage. A blocked gutter can force water back up and into your roof. You also want to also want to look for any cracks, holes and sags.
Solution: Using your gloved hand, clean out gutters by scooping out the debris into a trashcan. You can follow up the cleaning by rinsing the interior of the gutter with the hose. Use gutter repair compound to fix any cracks and holes. For sagging gutters, add or replace gutter hangers in the areas that need it.”
Article Source: National Assocation of the Remodeling Industry